1p2t solid state rf switch specification sheet jfw model 50S-1422 jfw industries, inc. phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com frequency range 100-500 mhz configuration 1p2t impedance 50 ohms nominal vswr 1.25:1 maximum insertion loss 0.5 db maximum isolation 55 db minimum switching speed 40 microseconds (50% ttl to 10% or 90% rf) rf input power 250 watts average (cold switch) 500 watts peak (1usec pulse) 100 watts average (hot switch*) control (1 line) ttl low for j1-com ttl high for j2-com (off port is reflective) dc supply +15 vdc @ 250 ma +5 vdc @ 40 ma rf connector bnc, sma, tnc or n female operating temperature range -20oc to +70oc storage temperature range -55oc to +85oc physical size see outline drawing 092-3022 * if switch rate exceeds 1000 cycles per second, ex ternal heatsinking will be required to maintain a maximu m case temperature of +70oc. 04/06/2005 bac 04/06/2005 ecr/ecn # date rev appr / date ecr/ecn # dat e rev appr / date jfw form e-7-f rev f page 1 of 1
|
